Server model with two 7mm hot-swap rear drive bays and two PCIe slots
The following illustration shows the rear view of the server model with two 7mm hot-swap rear drive bays and
two PCIe slots. Depending on the model, your server might look slightly different from the illustration below.
Table 18. Components on the rear of the server
PCIe slot 1 on riser 1 assembly
1
Rear 7mm drive bays (2)
3
Power supply 1
5
USB 3.2 Gen 1 (5Gbps) connectors (3 DCIs)
7
XClarity Controller network connector
9
Note: For more information about each component, see
Server model with two 7mm hot-swap rear drive bays and one PCIe slot
The following illustration shows the rear view of the server model with two 7mm hot-swap rear drive bays and
one PCIe slots. Depending on the model, your server might look slightly different from the illustration below.
Table 19. Components on the rear of the server
PCIe slot 1 on riser 1 assembly
1
Power supply 2 (optional)
3
NMI button
5
USB 3.2 Gen 1 (5Gbps) connectors (3 DCIs)
7
Ethernet connectors on OCP module (optional, two or
9
four connectors may be available)
Note: For more information about each component, see
PCIe slot 2 on riser 1 assembly
2
Power supply 2 (optional)
4
NMI button
6
VGA connector
8
Ethernet connectors on OCP module (optional, two or
10
four connectors may be available)
"Rear components overview" on page
Rear 7mm drive bays (2)
2
Power supply 1
4
VGA connector
6
XClarity Controller network connector
8
"Rear components overview" on page
Chapter 2
30.
30.
.
Server components
29