Advertisement
Available languages
Available languages
22
English
Charging with the travel case
Battery status
Battery status
Low
Partially full
Note: Accessories included may vary based on the model
purchased.
1 Insert the USB cable to the charging travel case.
2 Connect the attached USB cable to the 5V DC input
power either from:
-
The USB adapter provided.
-
A UL-listed or certified to ANSI/UL 60950-1
personal computer's standard USB connector.
-
A UL-listed or certified to ANSI/UL 60950-1 LPS
power supply with USB output port.
-
A UL-listed or certified 1310 Class 2 power supply.
Important: The wall adapter must be a safe extra low
voltage source, compatible with the electrical ratings
marked on the bottom of the device.
3 Place the handle in the charging travel case.
-
The handle emits 2 short beeps to confirm that the
handle is placed properly.
-
The flashing light of the battery indicator shows
that the toothbrush is charging.
4 The travel case will charge your toothbrush until your
toothbrush is fully charged.
-
When the handle is fully charged, the battery
indicator lights up green for 30 seconds and then
switches off.
Note: Charging the handle with the charging travel case
may take longer than on the charger.
Battery status (handle on plugged-in
charger/charging travel case)
When the handle is placed on the charger or in the
charging travel case, the battery indicator shows the
battery level.
Number of flashing
LEDs
1
2
LED color
Flashing green
Flashing green
Advertisement
