Epson EB-770Fi User Manual page 277

Setting
Auto Power On
Power On Trigger
Sleep Mode
Sleep Mode Timer
A/V Mute Timer
Options
HDMI1
Computer1
USB Display
Off
Plug-in Detection
Signal Detection
On
Off
1 to 30 minutes
On
Off
277
Description
Selects whether to automatically
turn on the projector when you
connect an input signal to a
specific input source; USB
Display is only available when
USB Display is enabled; adjust
the Power On Trigger setting to
change the power on settings for
the HDMI1 option
Selects the power on condition
when Auto Power On is set to
HDMI1:
• Plug-in Detection:
automatically turns on the
projector when the device
connected to the HDMI1 port is
turned on
• Signal Detection:
automatically turns on the
projector when it detects an
HDMI video signal on the
HDMI1 port; selecting this
option increases standby
power consumption
Automatically turns off the
projector after an interval of
inactivity
Sets the time before the projector
automatically turns off (Sleep
Mode must be turned on)
Automatically turns off the
projector after 30 minutes if A/V
Mute is enabled