Selecting Whiteboard Print Settings - Epson EB-770Fi User Manual

• Reset Interactive Settings resets all adjustment values on the Interactive menu to their default
settings
4. When you finish selecting settings, press the Menu button to exit the menus.
Parent topic:

Selecting Whiteboard Print Settings

You can select the default settings for printing whiteboard pages from the projector.
1. Press the Menu button.
2. Select the Interactive menu and press
3. Select Print and press
4. Select the following printing options as necessary:
• Printer lets you select either USB Printer or Network Printer as the printer connection.
Note: Selecting USB Printer will also enable scanning from Epson all-in-one printers. Only Epson
printers are supported via USB connection.
• Printer Address lets you enter an IP address for a printer connected to the same network as the
projector.
Note: You cannot use the following IP addresses: 127.x.x.x, 192.0.x.x, or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255). To return the IP address to its default value,
enter 0.0.0.0.
• Printer Type lets you manually select the printer type or let the projector automatically determine
the printer type (in most cases, you should leave this setting as Auto Detect).
• PCL Type lets you select the PCL type to match the printer type and settings of the connected
network printer.
Note: If printing fails when using a PCL6 printer in Normal mode, try printing in Mode 1 or Mode
2.
• Test Print lets you send a test page to the connected printer.
• Default Paper Size lets you select either Letter or A4 as the default paper size.
Note: Use the displayed keyboard to enter the IP address if necessary. Press the arrow buttons on
the remote control to highlight numbers and press
Selecting Whiteboard Settings
Enter.
Enter.
Enter to select them.
238