Suggested Settings - SWR 350x Operating Instructions Manual

FINAL ENGINEERING SUMMARY
The two preamp gain stages utilize a specially-selected 12AX7A. The tone controls incorporate ICs, and
the power amp is designed with extremely high quality bi-polar devices. Each type of device was chosen for
its performance and reliability in the application used. The front panel and chassis of the 350x are com-
prised of aluminum, because of its superior electrical and thermal characteristics and light weight. All pri-
mary electrical components are U.L. approved, and SWR uses Beldon Cable for all shielded wire. All units
are assembled by hand and individually soundtested in the U.S.A. at our factory in Southern California.

SUGGESTED SETTINGS

The following page includes examples of tone control options for various styles of music. These settings are
intended for use as a starting point for dialing in your own individual sound, so feel free to make adjustments
based on your own playing style, instrument and speaker cabinet configuration. After you find combinations
you like, don't forget to try adding in the SubWave™... as much as you feel is necessary.
350x • 21