Getting Started; Step 1. Connect Ac Power Cord; Step 1A. Directv Satellite Dish Connection; Step 1B. Antenna/Cable Connection - Panasonic TZ-DBS01B Operating Instructions Manual

Getting Started

Step 1. Connect AC Power Cord

Plug the AC power cord into a grounded outlet. Do not turn on any devices until you
have finished making all necessary connections.

Step 1a. DIRECTV Satellite dish Connection

Connect the DIRECTV Satellite dish downlead to the Satellite In jack on the rear panel
of the Digital Satellite Receiver.
Note:

Step 1b. Antenna/Cable Connection

Connect the antenna or cable wire to the VHF/UHF IN jack on the rear panel of the
Digital Satellite Receiver. The signal from the terrestrial antenna or cable will be
passed through when the user presses the TV/SAT button on the remote control or
when the digital satellite receiver is off. The RF output of the Digital Satellite Receiver
must be connected to the television.
SATELLITE
IN
With this receiver and the proper satellite dish antenna, you may be able to subscribe
to local channels from DIRECTV in certain markets. Additional equipment may be
required in some areas. Check with your retailer or visit DIRECTV.com for information
on availability of local channels from DIRECTV in your area.
SATELLITE
IN
SATELLITE
DISH
VHF/UHF
NTSC OUTPUT
IN
R-AUDIO-L VIDEO
TEL LINE
VHF (SAT) /UHF
OUT
CABLE OR OFF-AIR ANTENNA
VHF/UHF
NTSC OUTPUT
IN
R-AUDIO-L VIDEO
TEL LINE
VHF (SAT) /UHF
OUT
G S
ETTING TARTED
AC IN
AC IN
17