Table of Contents
Advertisement
The Class ll insulation symbol(square within a square)indicates that
this product has been evaluated and tested to comply with Class ll
insulation requirements.
WARNING: To prevent damage which may result in fire or shock hazard,
do not expose this appliance to rain or moisture.
Note To CATV System Installer
This reminder is provided to call the CATV system installer's attention to article 820-40
of the National Electric Code that provides guidelines for proper grounding and in par-
ticular specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
IMPORTANT SAFETY INSTRUCTIONS
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8.Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus(including amplifiers)that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding type plug.
A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket or table specified by
the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tipover.
13.Unplug this apparatus during lightning storms or when unused for
long perods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged,liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
ADDITIONAL SAFETY INSTRUCTIONS
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product, be sure the antenna
or cable system is grounded so as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the mast and supporting struc-
ture, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See Figure.
EXAMPLE OF ANTENNA GROUNDING AS
PER (NEC) NATIONAL ELECTRICAL CODE
Installation
This unit Location
Adequate ventilation is essential to prevent internal component failure. Keep away from
areas of excessive heat or moisture.
To insure optimum color purity do not position magnetic equipment (motors, fans, other
speakers, etc.) nearby.
Optional External Equipment
The Video / Audio connection between components can be made with shielded video
and audio cables. For best performance, video cables should utilize 75 coaxial shielded
wire.
Advertisement
Table of Contents
