HP StorageWorks EVA 3000 Replacement Instructions page 5

Figure 9 Checking model number and firmware version
Adding the disk to a disk group
After replacing the disk, it should be added to a disk group. The disk is
typically added back into its original disk group.
1.
In the Navigation pane, select Storage system > Hardware > Rack
> Disk enclosure > Bay
2.
In the Content pane, select the Disk Drive tab.
3. Click Group to initiate the process for adding the disk to a disk
group.
Operation Successful is displayed indicating the disk is now
grouped, leveling has been initiated, and the storage system
begins immediately using the disk.
NOTE:
If the Device Addition Policy is set to automatic, the disk will
automatically be added to a disk group. In this case the Group
option will not be available.
Returning the failed component
Please follow the return instructions provided with the new component.
Page 5