Removing The Oven Door - KitchenAid KGST300 Technical Education

1. To remove the oven door, open the door to
its first stop.
2. Grasp the sides of the door, lift it slightly,
and pull the door forward until the hinge
hangers are partially out of the slots in the
chassis. Do not completely remove the
hinge hangers from the slots, since there
will be spring tension on them.

REMOVING THE OVEN DOOR

Partially Remove
Door
3. Reposition the angle of the door to its
vertical position to remove the spring ten-
sion on the hinge hangers, then pull the
hangers the rest of the way out of the
chassis slots.
Keep Door
Vertical
To reinstall the oven door:
1. Grasp the sides of the door and insert the
hinge hangers into the hinge slots. Lift the
door slightly and push in at the bottom until
the hangers are fully installed in the unit.
NOTE: If the hinge hangers are not seated
properly, the door will not close tightly and
may be off-center. To seat the hinge hang-
ers, keep the door vertical, then lift it
slightly, and push in on the bottom until the
hangers are fully seated.
2. Open and close the oven door to make
sure that it operates and seals properly.
4-28
Hinge Hanger