Power - MSI IFC-815N2D Series Manual

Power

Restore on AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off]
[Power On]
[Last State]
Resume On LAN
This field specifies whether the system will be awakened from power saving modes
when activity or input signal of onboard LAN is detected.
Resume On PME#
W hen setting to [Enabled], this setting allows your system to be awakened from the
power saving modes through any event on PME (Power Management Event).
Resume On RTC Alarm
W hen [Enabled], your can set the date and time at which the RTC (real-time clock)
alarm awakens the system from Suspend mode.
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status before power
failure or interrupt occurred.
BIOS Setup
3-25