Indicators - JVC LX-NZ30WE Instructions Manual

Indicators

There are 3 indicators which show the status of the projector. Check the following information
about the indicator lights. If there is anything wrong, turn the projector off and contact your
dealer.
Light
Off Off
Off Off
Off Off
Off Off
Off Off
Red Off
Red
Off
Flashing
Red Off
Red Off
Off Red
Red Red
Green Red
Orange Red
Off Red
Red
Off
Flashing
Red Green
Green
Red
Flashing
Red Red
Orange
Orange
Flashing
Power events
Green
Stand-by mode
Flashing
Powering up
Green
Normal operation
Green
Green
Normal power-down cooling
Flashing
Downloading
Red
Color wheel fail
Green
Phosphor wheel fail
Green
Light source events
Light source error in normal operation
Off
Green
Light source is not lit up
Flashing
Thermal events
Fan 1 error (the actual fan speed is outside the desired
Off
speed)
Fan 2 error (the actual fan speed is outside the desired
Off
speed)
Fan 3 error (the actual fan speed is outside the desired
Off
speed)
Fan 4 error (the actual fan speed is outside the desired
Off
speed)
Fan 5 error (the actual fan speed is outside the desired
Red
speed)
Flashing
Fan 6 error (the actual fan speed is outside the desired
Red
speed)
Flashing
Fan ic1 error (the communication between scaler and fan
Off
ic1 is not built up)
Fan ic2 error (the communication between scaler and fan
Off
ic2 is not built up)
Temperature 1 error (over limited temperature)
Orange
MCU download
Orange
Status & Description
Maintenance 35