Advertisement
Check Point
Speedometer
Headlamp
3. Check Points during Test Ride
Gear shifting
Driveability
Engine noise
4. Visual inspection for dent, scratches, rust etc
5. Clean the vehicle thoroughly before delivery to customer.
Note-
Vehicle FIFO system required with monitoring system.
Vehicles to be dispatched to network only after carrying out PDI activity at Dealership.
Do not drive vehicle in speed sensor dis connected condition & same to be instructed to customer.
What to check
Working of speedometer,
Fuel gauge-By filling fuel.
, Fuel gauge
Working of all signal
By observing speedo
indicators icons
Indications after switching
(Neutral,Turn signal, High
ON ignition switch.
beam,MIL & B Logo)
Head light Low & Hi
As per head light focus
beam focus checking
checking SOP.
Smooth operation
Throttle response, Brakes
effectiveness- Front &
Rear
No abnormal noise
Recommendation /
How to check
Speedometer working to
be checked during /
after test ride
Refer head light focus
values chart.
Focus to be checked
with rider & from a
distance of 5 meters.
In case of any issue
during test ride, vehicle
to be attended in
workshop.
Workshop
Reference
Observation
Tools , equipment &
consumables
required
Funnel for filling
petrol & measuring
jar
Head light Focus
display chart with
5m mark.
A.P.Grease,Feeler
gauge,Multimeter.
Advertisement
