Table of Contents
Advertisement
Codes
Setting up Phonecode
enables your phone to
temporarily disable SIM Lock,
even if you forget your PIN
number or replace your SIM
with another one.
The PIN protects your SIM
against unauthorised use. If you
enable the PIN, every time the
phone is switched on you will be
prompted to enter the PIN.
The PIN2 controls security for
the Fixed Dial Store, Call
Charge metering and Barred
Dial.
If either PIN/PIN2 is entered
incorrectly 3 times the phone
will be locked and you will
need to enter the PUK/PUK2
code.Contact the service
provider for the PUK/PUK2
code.
NOTE: To enter PUK code
for PIN, enter **05# you will
then be prompted to enter
the PUK code, then follow
the on-screen instructions.
To enter PUK2 code for
PIN2, enter **052# you will
then be prompted to enter
the PUK2 code, then follow
the on-screen instructions.
Change Phonecode........................................................................................................
From Phone Option menu
A
4
1
Security > Codes
A
4
2
Change Phonecode
A
3 Enter New Phonecode
Enabling/Disabling the PIN .......................................................................................
From Phone Option menu
A
4
1
Security > Codes
A
4
2
PIN Control
(Set)
A
3 Enter PIN number
(OK) > Repeat the entry
Changing the Security Code ......................................................................................
From Phone Option menu
A
4
1
Security > Codes
4
2
Change PIN or Change PIN2
A
3 Enter the current code
A
4 Enter the new code
(OK)
5 Enter the new code to verify
NOTE: If the PUK/PUK2 code is entered incorrectly 10 times, the phone will cease to operate permanently. All
information stored in the SIM will be lost and the SIM will need to be replaced. Contact the service provider for more details.
(Select)
(Select) > Enter the current Phonecode, if needed
A
(OK) > Repeat the entry
(Select)
A
(OK)
(Select)
A
(Select)
(OK)
A
(OK)
A
(OK)
(OK)
67
Advertisement
Table of Contents
