Muffler Screen And Spark Arrester - Yamaha EF2400iSHC Owner's Manual

0°C 25°C
å YAMALUBE 4 (10W-40)
∂ SAE 10W ç SAE #20
32°F 80°F
1
6. Install a new gasket and the oil drain bolt, and
then tighten the bolt.
Oil drain bolt tightening torque:
7. Add engine oil to the correct level.
NOTICE
Be sure no foreign material enters the crankcase.
7 Correct level
7
Recommended engine oil:
700-006a
Recommended engine oil grade:
∫ SAE #30
Engine oil quantity:
8. Install the O-ring and the oil filler cap.
9. Install the rubber cap on the bottom.
TIP
Be sure to install securely to prevent from falling off
during operation.
10. Close the oil filler cover.
AE01028

Muffler screen and spark arrester

The engine and muffler will be very hot after the
engine has been run.
Avoid touching the engine and muffler while they
are still hot with any part of your body or clothing
741-123
during inspection or repair.
1
1. Remove the muffler cover screws, and then
remove the muffler cover.
2
1 Muffler cover screw
2 Muffler cover
788-016
17 Nm (1.7 m·kgf, 12 ft·lbf)
A YAMALUBE 4 (10W-40),
SAE 10W-30 or 10W-40
B SAE #30
C SAE #20
D SAE 10W
API Service SE type or higher
0.6 L (0.63 US qt, 0.53 Imp qt)
WARNING
– 27 –