Table of Contents
Advertisement
Neptune DWC RM100 in-rack Coolant Distribution Unit
NOTE: Waste materials must be disposed of in a responsible manner in line with
environmental regulations.
The de-commissioning and disposal of this product should be undertaken by
qualified personnel in adherence to local and national safety regulations,
particularly for protection of lungs, eyes and skin from chemicals, dust etc.
Approved lifting gear and power tools should be used and access to the work
area must be restricted to authorised personnel.
The following steps are a guide only and should be adjusted to take into account
local site conditions:
1.
Disconnect unit from electrical supply.
2.
Drain and dispose of any heat transfer fluid through an
approved recycling facility.
3.
Remove unit to approved recycling facilities only.
CDU Operating & Maintenance Guide
Disposal Information
51
Page
Advertisement
Table of Contents
