Table of Contents
Advertisement
To tune in a preset station
On the front panel:
1. Press FM/AM to select the band
(FM or AM).
The last received station of the selected
band is tuned in.
SPK
ANALOG
L
R
2. Press FM/AM PRESET 5/ ∞
until you find the channel you
want.
• Pressing FM/AM PRESET 5 increases the
channel numbers.
• Pressing FM/AM PRESET ∞ decreases the
channel numbers.
From the remote control:
1. Press FM/AM.
• Each time you press the button, the band
alternates between FM and AM.
SPK
L
R
ANALOG
2. Press 10 keys to select a preset
channel number.
• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 20, press +10 then 10.
• For channel number 30, press +10, +10,
then 10.
Note:
When you use the 10 keys on the remote control, be sure that they are
activated for the tuner, not for the CD and others. (See page 26.)
17
FM/AM
TUNED
VOLUME
FM/AM PRESET
FM/AM
VOLUME
TUNED
TEST
– SUBWOOFER +
1
2
3
5
EFFECT
– CENTER +
4
5
6
– VCR CH +
– REAR•L +
7/P
8
9
5
MENU
– REAR•R +
10
+10
ENTER
Selecting the FM Reception Mode
When an FM stereo broadcast is hard to
receive or noisy
You can change the FM reception mode while receiving an FM
broadcast.
• You can store the FM reception mode for each preset station.
On the front panel ONLY:
Press FM MODE.
• Each time you press the button, the FM reception
mode alternates between "AUTO" and "MONO."
SPK
L
R
ANALOG
AUTO MUTING TUNED STEREO
SPK
L
R
ANALOG
AUTO:
When a program is broadcasted in stereo,
you will hear stereo sound; when in
monaural, you will hear monaural sounds.
This mode is also useful to suppress static
noise between stations. The AUTO
MUTING indicator lights up on the display.
MONO:
Reception will be improved although you
will lose the stereo effect. In this mode, you
will hear noise while tuning into the
stations. The AUTO MUTING indicator
goes off from the display.
FM MODE
TUNED
Advertisement
Table of Contents
