enservice
13.2 Set program
Turn the program selector and set it
1.
to the required programme.
→ "programs", page 24
If necessary, adjust program
2.
settings → page 30 .
13.3 Customize program
settings
Precondition:A program is set.
→ "Set program", page 30
Adjust the program settings.
▶
→
"Buttons", page 23
A notice:The program settings are not
saved permanently for the program.
13.4 Load laundry
A notice:To avoid creasing, observe
the maximum load of the
→ "programs", page 24 .
Precondition:The laundry is prepared.
→ "Laundry", page 28
Open the door.
1.
Make sure the drum is empty.
Put the laundry in the drum.
2.
Close the door.
3.
Make sure no laundry is caught in
the door.
13.5 Use dosing aid for liquid
detergent
If you use the dosing aid as an accessory
order, you must
deploy.
The Detergent Sch
1.
draw.
30
the dosing aid
drawer out-
Press down the insert and remove
2.
the detergent drawer.
Insert the dosing aid.
3.
Insert the detergent drawer.
4.
13.6 Use dosing aid for liquid
detergent
You can use a dosing aid in the
detergent drawer to measure out
liquid detergent.
Pull out the detergent drawer.
1.