Table of Contents
Advertisement
en Home Connect
15.3 Home Connect menu
The Home Connect menu contains
all of the Home Connect settings.
Calling up the Home Connect
menu
Press and hold Fernstart for at
▶
least 3 seconds.
a The display shows the first setting
of the Home Connect menu.
Navigating in the Home Connect
menu
Briefly press Fernstart until the
▶
display shows the required setting.
Exiting the Home Connect menu
Press and hold Fernstart for at
▶
least 3 seconds.
15.4 Activating Wi-Fi on the
appliance
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 36
¡ The display shows oFF.
Press
to change the setting.
▶
a The display shows on if the Wi-Fi
is activated.
Note: If the Wi-Fi is activated, the dis-
play alternately shows on and the
signal strength of the Wi-Fi connec-
tion.
36
15.5 Deactivating Wi-Fi on the
appliance
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 36
¡ The display shows on.
Press
to change the setting.
▶
a The display shows oFF if the Wi-Fi
is deactivated.
15.6 Resetting the appliance
network settings
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 36
¡ The display shows rEs.
Press and hold
▶
3 seconds.
a The network settings are reset.
15.7 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
¡ The appliance door is opened.
Fernstart is pressed.
¡
¡ Following a power cut.
Activating remote start
Requirements
¡ The appliance is connected to your
home WiFi network.
¡ The appliance is connected to the
Home Connect app.
¡ A programme is selected.
¡ The appliance door is closed.
for at least
Advertisement
Table of Contents
