Adjusting The Programme Settings; Saving The Programme Settings; Loading Laundry; Inserting The Measuring Aid For Liquid Detergent - Bosch WGB2560X0 User Manual And Installation Instructions

Table of Contents

Advertisement

en operation
Start the programme.
5.
→ "Starting the programme",
Page 33
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 31
Adjust the programme settings.
→ "Buttons", Page 23
Observe the information about op-
erating logic → Page 18.
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡ A programme is set.
→ "Setting a programme", Page 31
¡ The programme settings have
been adjusted.
→ "Adjusting the programme set-
tings", Page 32
Press and hold Favorit for approx.
3 seconds.
Press Favorit to call up the saved
programme.
Note: To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 26
32
Requirements
¡ The laundry is prepared and sor-
ted.
→ "Laundry", Page 30
¡ The drum is empty.
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.6 Inserting the measuring
aid for liquid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
Pull out the detergent drawer.
1.
Press down on the insert and re-
2.
move the detergent drawer.
Insert the measuring aid.
3.
Insert the detergent drawer.
4.

Advertisement

Table of Contents
loading

Table of Contents