Table of Contents
Advertisement
Recording
Recording
TV programmes
This unit can record two programmes being
broadcasted at the same time.
Preparation
If you want to change the recording mode (picture
quality) (
right)
1
Select the channel to record.
2
Press [REC ¥].
Recording will start.
3
Select "Automatic Stop", then press [OK].
• One touch recording (OTR)
Recording stops automatically when the
programme ends.
Automatic Stop at XXXXX
Recording Time
Continuous recording
To record two programmes simultaneously
While recording, perform steps 1–3 (
• Channel can only be switched between the recording
programmes.
• If a timer recording reaches its start time when all tuners
are being used for recording, the recording (OTR) of one of
the programmes terminates.
• Copying cannot be performed while recording.
• When "Automatic Standby after OTR" is set to "On". (
To set the recording time
1 Select "Recording Time" or "Continuous
recording" in step 3 (
Recording Time:
You can set the length of recording time from
30 minutes to 4 hours.
• You can select the recording time with [2, 1].
2 Press [OK].
REC1/OTR
XXXXX - XXXXX
30 min
above).
To change the recording mode (picture quality)
This unit can record programmes in DR mode and
then automatically change their recording mode
(picture quality) to another setting while in
standby mode.
1 Press [OPTION].
2 Select "Recording Mode".
3 Select the recording mode (picture quality),
then press [OK].
• Recording mode (Picture Quality) (
• The recording mode set here is used as
the default value for the next recording.
To change the recording mode after recording
in DR mode (
To check to see if the recording mode change
above).
is finished (
To cancel the recording mode change (
• Programmes in the original picture quality (DR mode) will be
deleted after their recording mode is changed.
• It takes about the same amount of time as recording to
change the recording mode.
• When the HDD does not have enough remaining space, the
79)
recording mode change function does not operate.
• A recording mode change stops when this unit is turned on.
The process will start from the beginning again after the unit
is switched to standby mode.
• Even if you change the recording mode of a programme, its
audio, subtitle settings will remain the same as those at the
start of recording.
Recording Mode ( Picture Quality )
HDD Remain
h
m
(DR)
DR(Original)
HG
HX
High
HE
Definition
HL
HM
XP
Standard
SP
Definition
LP
OK
RETURN
48, "Picture Quality Change")
49)
19)
49)
25
TQBS0146
Advertisement
Table of Contents
