Table of Contents
Advertisement
Software (Firmware)
Update
You cannot operate the unit until the update
is complete. Don't remove the AC mains lead
during the update. Removing the AC mains
lead while the update is in progress may
damage the unit.
Update software (firmware) of this unit
Software of this unit can be updated automatically
by the following methods at the specified time.
• From Internet
Network connection and setting are required.
(
12, 14)
If a software (firmware) update is available, a
notification is displayed.
New software version has been found.
The software will be updated automatically
after this unit is switched to standby.
Do not disconnect the AC mains lead.
• It is displayed on the Channel Information
(
22) when the Software (Firmware) can be
updated immediately.
e.g.,
NEWS
1
XXXXX - XXXXX
Now
Rating: G
Dolby D
To execute, press the red button while the
Channel Information is displayed, and follow the
instructions on the screen.
Update of the software (firmware) will start when
the unit is turned to standby mode.
To update the software (firmware) immediately
Use the "Software Update Now ( Internet )"
function. (
80)
• It may take up to a few hours until the update is completed
depending on the network environment.
• The timer recording always takes preference over the
software (firmware) download; if the timer recording is
scheduled to start, the downloading will be performed at the
next opportunity.
• You can also download the latest software (firmware) from
the following website.
http://panasonic.jp/support/global/cs/
68
TQBS0146
XXXXXX
All Digital Channels
Software update
Change category
Other operations
Media management
[BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW]
[SD]
1
Press [FUNCTION MENU].
2
Select "Media", then press [OK].
3
Select the media, then press [OK].
4
Select the management item, then press
[OK].
• Selectable items will change depending on
the selected item and inserted media.
Disc Name
[BD-RE] [BD-R] [RAM] [DVD-R] [DVD-RW] [+R] [+RW]
This function is to name a disc.
Refer to "Entering text". (
• The disc name is displayed in the Blu-ray Disc
Management/DVD Management window.
• [DVD-R] [DVD-RW] [+R] With a finalised disc, the
name is displayed on the Top Menu.
• [+RW] The disc name is displayed only if you
play the disc on other equipment after creating
Top Menu.
• Do not perform this operation before copying HD Video
(AVCHD) to DVD-R or DVD-R DL. (
Disc Protection
[BD-RE] [BD-R] [RAM]
Select "Yes", then press [OK].
e.g.,
Disc Name
Disc Protection
On
Delete all programmes
• To release the protection
Repeat the same steps.
• The screen icon will be switched to "Off".
70)
56)
Advertisement
Table of Contents
