Table of Contents
Advertisement
Recording
Recording TV programmes
Recording
The titles can only be recorded to built-in
HDD and cannot be copied from built-in HDD
to the media other than USB HDD.
• This unit can record two programmes being
broadcasted at the same time.
1
Select the channel to record.
2
Press [REC ¥].
Recording starts.
• "REC1" or "REC2" will light on the unit's
display.
3
Select "Automatic Stop", then press
[OK].
• One touch recording (OTR)
Recording stops automatically when the
programme ends.
8:00 - 8:45
Automatic Stop (Guide Link) at 8:45
Recording Time
Continuous recording
• You can also select "Recording Time" or
"Continuous recording". (
28
VQT4E91
REC1/OTR
30 min
right)
To set the recording time
1 Select "Recording Time" or "Continuous
recording" in step 3 (
Recording Time:
You can set the length of recording time from
30 minutes to 4 hours.
• You can select the recording time with
[2, 1].
Continuous recording:
The recording is continued until you press
[STOP ∫].
2 Press [OK].
• One recording will terminate when simultaneous recording
is being done and timer recording starts.
• Digital teletext will not be recorded.
• Following contents or media cannot be played back while
recording.
- DivX and MKV file
- photo
- USB memory
• Copying cannot be performed while recording.
• When "Automatic Standby after OTR" is set to "On" (
this unit is turned to standby mode if this unit is not
operated for approximately 5 minutes after completing
"Automatic Stop" or "Recording Time".
left).
77),
Advertisement
Table of Contents
