Table of Contents
Advertisement
Replacing Components
If the power supply does not move out of place, it is secured in the slot. If the power supply moves, carefully press
it all the way into the slot until it clicks in place.
c) Attach the power connector block end of the power cable to the electrical outlet on the front of the power supply.
d) Turn on the circuit breaker for the power source.
e) Verify that the power supply is operational by making sure that the power supply LED is green.
Cisco Nexus 9336C-FX2-E ACI-Mode Switch Hardware Installation Guide
Replacing a DC Power Supply
47
Advertisement
Table of Contents
