Cisco Nexus 9336C-FX2-E Hardware Installation Manual page 35

Aci-mode switch

Hide thumbs Also See for Nexus 9336C-FX2-E:

Table of Contents

Installing the Switch Chassis

Step 6

After the switch boots, verify that the following LEDs are lit:

• On the fan modules, the Status (STA or STS) LED is green.

If a fan module Status LED is not green, try reinstalling the fan module.

• After initialization, the switch chassis Status (labeled as STA or STS) LED is green.

Step 7

Verify that the system software has booted and the switch has initialized without error messages.

A setup utility automatically launches the first time that you access the switch and guides you through the basic

configuration. For instructions on how to configure the switch and check module connectivity, see the appropriate Cisco

Nexus 9000 Series configuration guide.

Cisco Nexus 9336C-FX2-E ACI-Mode Switch Hardware Installation Guide

Starting the Switch

Table of Contents