Table of Contents
Advertisement
∫ Enjoying multi-channel surround sound
Coaxial cable
Amplifier with a built-in
decoder or a decoder-
amplifier combination
COAXIAL IN
≥You cannot use DTS Digital Surround decoders not suited to DVD.
Change "PCM OUTPUT", "DOLBY DIGITAL" and "DTS" (➜ 17, "AUDIO" menu).
∫ Connect the AC power supply cord last
AC power supply cord
To household AC outlet (AC 120 V, 60 Hz)
Conserving power
This unit consumes a small amount of power even when it is turned off (1 W). To save
power when the unit is not to be used for a long time, unplug it from the household AC
outlet.
STEP 2
∫ Batteries
Back of the unit
Mishandling of batteries can cause electrolyte leakage which can damage items the
fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of time. Store
in a cool, dark place.
∫ Use
Aim at the remote control sensor (➜ 8), avoiding obstacles, at a maximum range of
7 m (23 feet) directly in front of the unit.
STEP 3
Preparation
Turn on the television and select the appropriate video input on the television.
1 Press [Í]
2 Press [SETUP].
QUICK SETUP screen appears.
3 Follow the on-screen instructions and select the settings with [3 4]
and [ENTER].
≥ Press [RETURN] to return to previous screen.
4 Press [ENTER] to finish setting.
5 Press [SETUP] to exit the setup menu.
≥ To change these settings later, select "QUICK SETUP" (➜ 17, "OTHERS" menu).
The remote control
≥ Insert so the poles (i and j) match those in the
remote control.
≥ Do not use rechargeable type batteries.
R6/LR6, AA
Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese
batteries.
≥ use batteries if the covering has been peeled off.
Quick setup
.
7
Hide quick links:
Advertisement
Table of Contents
