Table of Contents
Advertisement
∫ "AUDIO" menu
SETTING STATE
Display the current setting of the items below
PCM OUTPUT
UP TO 48 kHz:
Check the digital input
When connected to equipment compatible with
limitations of the
44.1 or 48 kHz
equipment you connect
UP TO 96 kHz:
using COAXIAL terminal
When connected to equipment compatible with
and select the maximum
88.2 or 96 kHz
≥ Signals from copy-protected discs are converted to
sampling frequency of
PCM digital output.
48 or 44.1 kHz.
≥ Some equipment cannot handle sampling
frequencies of 88.2 kHz, even if they can handle 96
kHz. Read your equipment's operating instructions for
details.
DOLBY DIGITAL
BITSTREAM
With COAXIAL
connections (➜ 7)
PCM
DTS
BITSTREAM
With COAXIAL
connections (➜ 7)
PCM
DYNAMIC RANGE
ON: Adjusts for clarity even when the volume is low
through compressing the range of the lowest
sound level and the highest sound level.
Convenient for late night viewing. (Only works
with DOLBY DIGITAL)
OFF
∫ "DISPLAY" menu
SETTING STATE
Display the current setting of the items below
LANGUAGE
ENGLISH
Select "BITSTREAM" when the
equipment can decode the bitstream
(digital form of multi-channel data).
Otherwise, select "PCM". (If the
bitstream is output to the equipment
without a decoder, high levels of
noise can be output and may
damage your speakers and hearing.)
FRANÇAIS ESPAÑOL
∫ "OTHERS" menu
SETTING STATE
Display the current setting of the items below
REGISTRATION
You need this registration code to purchase and play DivX
Displays the unit's
Video-on-Demand (VOD) content.
registration code.
Select "SHOW CODE" and press [ENTER].
(➜ 13, About DivX VOD content)
JPEG TIME
To change the slideshow timing
1 SEC to 15 SEC (in 1 unit)
15 SEC to 60 SEC (in 5 unit)
60 SEC to 180 SEC (in 30 unit)
≥ "3 SEC" is the factory preset.
FL DIMMER
BRIGHT
Changes the
DIM
brightness of the
AUTO: The display is dimmed, but brightens only when you
unit's display.
perform some operations.
AUTO POWER OFF
ON:
The unit switches to standby mode after about 30
minutes in the stop mode.
OFF
QUICK SETUP
Select "SET" and press [ENTER].
DVD–VR: To play [DVD-VR] on DVD-RAM.
DVD–VR/DATA
To play [MP3] or [JPEG] contents on DVD-RAM.
DATA:
DEFAULTS
Select "RESET" and press [ENTER].
This returns all
The password screen is shown if "RATINGS" (➜ 16) is set.
values in the setup
Please enter the same password with the numbered buttons,
menus to the default
then press [ENTER], then turn the unit off and on again.
settings.
§1
The original language designed on the disc is selected.
§2
Input a code number referring to the table (➜ 18).
§3
If the language selected for "AUDIO" is not available, subtitles appear in that
language (If available on the disc).
17
Hide quick links:
Advertisement
Table of Contents
