Table of Contents
Advertisement
VCR's Output Channel
*Important:
If a remote control button does not work
when pressed, press the VCR button on the
remote and try the button again.
■ ■ ■ ■ ■ Time Zone Adjust
(Only when Auto Clock is set.)
1) Press
to select "SET
CLOCK," and press SET.
2) Press
to select "TIME
ZONE ADJUST,"
and press SET to subtract
or add hour(s) as
necessary.
3) Press ACTION.
• "TIME ZONE ADJUST"
returns to "0" if clock is set
manually.
■ ■ ■ ■ ■ VCR's Output
Channel
1) Press
to select
"VCR'S OUTPUT
CH.," and press SET.
2) Press SET.
3) Press ACTION.
After 3 seconds
• To Make Corrections,
repeat steps 1) ~ 3).
POWER
NUMBER
keys
CH
/
ADD/DLT
ACTION
SELECT
SET
VCR
Add or Delete a Channel
To add channel:
Select channel with NUMBER keys
and press ADD/DLT.
To delete channel:
Select channel with CH
/
NUMBER keys and press
ADD/DLT.
DST (Daylight Saving Time)
DECK auto adjusts clock for DST.
(p. 17.)
Spring (First Sunday in April)
DST:ON ➛ ➛ ➛ ➛ ➛ Sets clock ahead one hour.
Autumn (Last Sunday in October)
DST:ON ➛ ➛ ➛ ➛ ➛ Turns clock back one hour.
• If your area does not observe
Daylight Saving Time, select
DST:OFF.
• Keep these time changes in mind
when programming DECK for timer
recordings.
or
19
Hide quick links:
Advertisement
Table of Contents
