Advertisement
Push and hold the "LEFT WING RETRACT" rocker switch to return the
wing. Continue testing the remaining rocker switch functions. Monitor
the fluid level in the reservoir and fill to 3/4" from the top of the tank if
needed. Also, look for any hydraulic fluid leaks around the manifold,
pump, hydraulic hoses and all cylinders.
5. Lastly, check that the vehicle and plow headlights are in proper work-
ing condition including the turn signals. If necessary, adjust the plow
headlight beams with the plow in the raised position.
Congratulations on a successful assembly and installation! Once all of the
blade and electrical functions have been tested your Blizzard Power Plow
snowplow is ready for action. Should you need additional support during
a plow assembly or undercarriage installation, contact your local authorized
Blizzard Dealer.
E
R
X
E
T
T
E
R
N
D
A
C
T
WARNING
To prevent accidental plow activation, turn POWER
switch to the "OFF" position when not in use.
BLZ 1010
Testing The Snowplow (Cont.)
E
X
T
E
N
D
15
Advertisement
