Advertisement
Add Portal
•
Right-click on "Portals" and select "Add Portal".
•
If the converter used for the biometric readers is RS485 to
TCP/IP, then create a portal by adding the IP Address of the
converter. (Figure 5)
Figure 6: Add Portal
Note: The portal can be added automatically with the "Search"
function.
Add Reader
•
Right-click on the portal connected to the reader and
select "Add Reader"
•
Select the type of the reader and fill the reader form. Put
the serial number of the biometric reader. The serial number is
written on the back side of the reader, but also can be
searched from the software
P/N 1073512A• REV 00.00 • ISS 4JUL18
Click on "Save" and the reader icon appears under
the selected portal
Right-click on reader and select "Check version" to
see if the reader is online
If reader is online, new line is added on top of the
event table
If reader is not online, following line is added on top of
the event table
Note: The reader can be added automatically with the
"search" function
Edit reader
Right-click on the reader and select "Properties"
3 / 7
Advertisement
