Panasonic Toughbook CF-H1ADBAZCM Operating Instructions Manual page 12

First-time Operation
About the battery for this computer
This computer uses 2 battery packs.
The battery is charged (
the other battery pack automatically.
l When the computer is connected to the Cradle (optional: CF-VEBH11U, CF-VEBH11AU), the battery pack is
charged when the AC adaptor is connected to the Cradle.
l With the battery charger (optional: CF-VCBU11U) or the Cradle (optional: CF-VEBH11U, CF-VEBH11AU), you can
remove the empty battery pack from the computer and charge it while using the computer.
l You can insert or remove the battery pack while the computer is ON. Be sure not to remove the battery pack being
è
used by mistake. (
l Charge the battery earlier when the battery indicator lights in red.
NOTE
l To conserve power, the following power saving methods are set at the time of purchase (when computer is plugged
in).
Ÿ The screen automatically turns off after 10 minutes of inactivity.
Ÿ The computer automatically enters sleep
Reference Manual "Sleep and Hibernation Functions" about resuming from sleep.
è
*1
Ÿ The screen automatically turns off after 15 minutes of inactivity.
Ÿ The computer automatically enters standby
Reference Manual "Standby and Hibernation Functions" about resuming from standby.
*2 è
l Note that the computer consumes electricity even when the computer power is off. If the battery pack is fully
charged, the battery will fully discharge in the following period of time:
Ÿ When power is off: Approx. 2 weeks
Ÿ In sleep (
Ÿ In hibernation: Approx. 3 days
l When the DC plug is not connected to the computer, disconnect the AC cord from your AC wall outlet. Power is
consumed simply by having the AC adaptor plugged into an electrical outlet.
Power consumption in each mode is as follows. (When AC adaptor is connected)
Ÿ When the screen is off: Approx. 9.5 W
Ÿ In sleep (
Ÿ The battery pack is fully charged (or not being charged) and the computer is off: Approx. 0.9 W
n Using the digitizer pen
right button
Attaching the digitizer pen to the computer
A
Pass the shorter
loop through the
hole.
12
è
page 13) and power is consumed only on either battery pack. These operations switch to
Reference Manual "Battery Power" )
after 20 minutes of inactivity.
*1
*2
) / standby (
) / standby (
You can use Windows by touching screen in the same
way as the mouse. Touch the screen surface with the
digitizer pen (included).
To right-click
Touch and hold with the digitizer pen, or press and hold
the right button, and then touch the object.
B
after 20 minutes of inactivity.
) : Approx. 2 days
) : Approx. 1.1 W
C
longer loop