Panasonic Toughbook CF-F8EWDZZAM Supplementary Manual page 17

Accessing "File Safe"
after Protector Suite
QL uninstallation.
Accessing "File Safe"
after computer crash.
Removing data from
the reader.
"Lift Finger" is
displayed during
operation.
"File Safe" data can be accessed only using
Protector Suite QL. If you accidentally uninstalled
Protector Suite QL, you have to reinstall it. If
passport data was not removed during uninstallation,
everything will work automatically including "File
Safe". If the passport data was removed during
uninstallation, the "File Safe" will recognize that the
installation was changed and will offer to use the
backup password, instead.
If you have an exported passport, import it now so
you can access "File Safe" directly using fi ngerprints.
Otherwise you can access "File Safe" using the "File
Safe" backup password: "File Safe" will recognize
that the installation was changed and will offer to use
the backup password, instead.
When enrollment to the device is used, passport
data is stored to the device. To remove it, go to
the "Delete" passport wizard and delete existing
passports, and then use the "Fingerprint Inspector"
to remove remaining fi ngerprints (e.g. left over from
previous installations).
In convenient mode, the "Fingerprint Inspector" does
not allow deleting the last fi ngerprint for an existing
passport and only user's own fi ngerprints can be
deleted. Therefore it is necessary to delete passports
fi rst.
You can temporarily disable the fi ngerprint sensor
with the following procedure.
A Right-click the "Protector Suite QL" icon
notifi cation area.
B Select [Don't Use Sensor].
The icon turns gray.
To enable the fi ngerprint sensor, proceed as follows.
A Right-click the "Protector Suite QL" icon
notifi cation area.
B Select [Use Sensor].
in the
in the
17