Deleting (Initializing) Owner's Data
When you dispose of the computer or transfer the ownership, delete (initialize) the
owner's data to avoid unauthorized access. To initialize the owner's data, perform
steps 1 to 3.
In other cases, refer to the required steps.
NOTE
The data enrolled in the fi ngerprint sensor is not image data. You cannot re-
store fi ngerprint image data from the data enrolled in the fi ngerprint sensor.
1
Disable Power-on Security
Performed by the Computer Administrator.
A <Model with Windows XP>
Click [start] - [All Programs] - [Protector Suite QL] - [Control Center].
<Model with Windows Vista>
Click
· The "Fingerprint Control Center" screen appears.
B Click [Power-on Security].
C Remove the check mark from [Enable power-on security using fi ngerprints], and
click [OK].
D Click [Enroll or Edit Fingerprints].
· "User Enrollment" wizard starts. Follow the on-screen instructions.
E When the "User's Fingers" screen appears, click [Next] without deleting fi nger-
print samples.
F Click [Manage Passwords...].
G Select [Power-On] in [Password Types], and click [Unset password...].
H Enter the password for Power-on Security, and click [OK].
I Click [Close].
· Confi rm that there is no item in [Password Types].
J Click [Next].
K Click [Next].
L Click [Finish].
· Follow the on-screen instructions.
2
Delete Fingerprint Data
Performed by each user.
(Start) - [All Programs] - [Protector Suite QL] - [Control Center].
11