Panasonic Toughbook CF-F8EWAZZAM Operating Instructions Manual page 50

Bluetooth
To make connections with the serial port / human interface
Tap the [Serial Port] or [Human Interface] tab, and make the following procedure.
A Turn on the Bluetooth device.
B Tap [Select Device] (A).
<Only when making connections with the serial port>
If you add the check mark for [Auto Reconnect] (C), the connection will
be made automatically when Bluetooth is enabled.
C Tap [Search] (D).
D Tap the Bluetooth device name you want to connect from the list box (E).
E Tap (F).
F Tap [Connect] (B).
When the [Enter PIN code] screen appears, enter the pin code, and then
tap [OK].
When the connection is active, the [Status] display shows "Connected."
To terminate the connection
Tap [Disconnect] from the [Serial Port] or [Human Interface] tab.
When the connection is broken, the [Status] display shows "Not con-
nected."
<Only when making connections with the human interface>
• If the connection terminates by tapping [Disconnect], the connection
will not automatically be reestablished until tapping [Connect].
• Refer to the device manual when reconnecting.
50