Panasonic Toughbook CF-F8EWAZZAM Operating Instructions Manual page 21

When making connections with a LAN
For the following operation, make
sure the LAN is enabled.
Tap [ETHERNET1], and then tap
[File] - [Enable].
The icon will change from
.
A Double-tap [ETHERNET1].
B Tap the [IP Address] tab, and set an IP address and subnet mask.
If DHCP is available on the network
Select [Obtain an IP address via
DHCP].
C Tap .
When making connections with a wireless LAN
A Tap
<
CF-08TX1BX1M
If the [Wireless LAN1] screen is not displayed, double-tap
the desktop, and then double-tap [Wireless LAN].
<
CF-08TX2CX1M
If the [WIRELESS LAN 11BG1] screen is not displayed, double-tap
on the desktop, and then double-tap [Wireless LAN].
B Tap the [Wireless Information] tab, and then tap the access point from the list.
Now, select settings as follows according to your own network environment.
C Tap [Connect].
to
.
>
>
When making connections with a wire-
less LAN
<
CF-08TX1BX1M
A Double-tap [WIRELESS LAN1].
<
CF-08TX2CX1M
A Double-tap [WIRELESS LAN
11BG1].
If DHCP is not available on the network
Select [Specify an IP address], and
enter the IP address, subnet mask and
if necessary, default gateway.
>
>
on
21