Panasonic Toughbook CF-73NCQTSKM Operating Instructions Manual page 13

Select settings for your region, then select [Next].
3
Enter your name and organization and then select [Next].
4
Enter your computer name and administrator password and then select [Next].
5
CAUTION
Remember this password! If the password is forgotten, Windows cannot
be operated.
Enter the correct date, time and time zone, then select [Next].
6
NOTE
It may take some time before the computer restarts and the screen of step
is displayed. Wait, and do not press any keys, or touch the touch pad, etc.
7
If the keyboard or the touch pad etc. are operated, a message will appear
indicating that there is no response on the screen, or some screens may
appear white. In such cases, also wait until the next screen is displayed.
The computer will restart.
Enter your administrator password and select
7
8
Create a new account.
Select [start] - [Control Panel] - [User Accounts] - [Create a new account].
1
Enter a name for the new account, then select [Next].
2
Select [Computer administrator], then select [Create Account].
3
<When you want to create a password for the new account>
4
Select the new account you have created and select [Create a password].
Follow the instructions on the screen to create a password.
Select [start] - [Turn Off Computer] - [Restart] to restart the computer.
5
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
operated. You can create a password reset disk beforehand (
NOTE
When creating a new user account:
• If you make mail settings, create password reset disks (
conduct other related operations before creating the user account, you will
be unable to use any previous mail history or settings.
• When you create the first new account, you can only select [Computer
administrator].
Once a "Computer Administrator" account has been created, you can cre-
ate additional limited user accounts.
Note also that only the added user account will be displayed in the Wel-
come screen. The account for the administrator created during Windows
setup will not be displayed.
9
<Only for models with touchscreen>
Calibrate the touchscreen.
Log on to Windows.
1
Select [start] - [Control Panel] - [Other Control Panel Options] - [Touch Panel] -
2
[Calibration] - [Calibrate Now].
Touch the nine "+" marks on the calibration screen with the stylus (included).
3
Select [Update].
4
Select [OK].
5
NOTE
Calibrate the touchscreen for each account created.
.
page 14).
page 14), or
13