Table of Contents
Advertisement
▋ Overdubbing data in a USB memory device
1. With a USB memory device connected to the instrument,
pressing the [PLAY/STOP] button will enter the Song Browser
screen.
2. Press the [UP] or [DOWN] button to move the selection cursor
over the song to be overdubbed.
3. Press the [REC] button to enter the USB Recorder screen.
The LED indicator for the [REC] button will start to flash once
the USB Recorder screen opens.
4. Press the [UP]/[DOWN] button to select a "Mode".
5. Press the [LEFT]/[RIGHT] button to select a mode as follows.
• Select "Over Dubbing" if it is MP3 or WAV data.
• Select "Conv.to Audio" if it is SMF or KSO data.
6. Press the [PLAY/STOP] button to start recording.
Recording can also be started by pressing a key.
The LED indicators for the [REC] button and [PLAY/STOP] but-
ton will turn on when recording starts.
P22
Saving the recorded performances
• SMF and KSO data is converted to MP3/WAV data when overdubbing.
• Normal recording will start if "New Song" is selected instead of overdubbing.
1
2
EFFECTS
2
3
4
5
EFFECTS
4
6
Basic Operation
REVERB
5
REVERB
25
Advertisement
Table of Contents
