Table of Contents
Advertisement
< Method 2 >
Note: When servicing, do not touch white resin part
as shown below.
1. Remove the Top Cover, the Front Assembly and
the DVD Mecha & DVD Main Assembly. Then,
remove the DVD Mecha Unit.
2. Remove two screws, and remove the Insulating
Plate.
Insulating Plate
3. Release two Locking Tabs, and lift up one side of
the Clamper Assembly.
Clamper Assembly
Screw
Do not touch!
Locking Tabs
1-5-4
4. Release two Locking Tabs, and remove the
Clamper Assembly.
Clamper Assembly
Locking Tabs
5. Remove the disc.
Disc
E6700DC
Advertisement
Table of Contents
