Using Your Hearing Aids - Jabra ENHANCE SELECT 100 User Manual

Using your hearing aids

Turning your hearing aids on and off
1. To turn on: Press and hold the button for 5 seconds
2. To turn off: Press and hold the button for 5 seconds
Pressing the button for different lengths of time enables other functions such as flight mode and streaming. See
"Using the push button ", page 21
When the hearing aid turns on, the green LED lights up. When the hearing aid turns off, the green LED flashes
3 times.
Your hearing aids also turn off automatically when you place them in the charger (while it is active), and they
turn on automatically when you remove them from the charger (while it is active).
Your hearing aids always start in program 1 at the pre-set volume.
Smart Start
Smart Start delays the time before your hearing aid turns on after you remove the hearing aid from the charger.
With this function activated, you will hear a beep for each second of the delay period (either 5 or 10 seconds).
Listening programs
The hearing aids are programmed for the following programs that can help you in specific situations.
20