Display Overview - Zoom H1n-VP Operation Manual

Display overview

Recording Screen
① File name
② Status icon
③ Level meters
④ Function buttons
① File name
This shows the name of the file being recorded.
② Status icon
This shows the recording status.
Ready Recording
③ Level meters
These shows the current input levels.
④ Function buttons
These show functions that can be set on the Recording Screen.
From left to right, these correspond to
To change the setting, press the same key again while the parameter appears enlarged.
⑤ Remaining battery charge
This shows the remaining battery charge. When the remaining battery charge becomes low,
replace the batteries (→
⑥ Counter
This shows either the current elapsed recording time or the remaining available recording time
(→ "Setting how the counter
⑦ Clipping indicators
These appear lit when loud sounds are input. If the clipping indicators light, adjust the input level
(→ "Adjusting input
Paused
"Using batteries") or connect an AC adapter (→
appears").
levels") or set the limiter (→
Overdubbing (→ "Overdubbing")
, , and
"Setting the limiter").
8
⑤ Remaining battery charge
⑥ Counter
⑦ Clipping indicators
.
"Using an AC adapter").