Reassembly
Use fingers to secure the position of the Main Antenna
Apply 10 Ncm torque when tightening the Screw Other
Len:4.0 Diam:1.4 with Bits (JCIS No 0)
5.9
Cushion Battery
Place the Cushion Battery with a pair of tweezers
5.10 Embedded Battery
Follow the 4.22 removal and installation instruction to
replace a new Adhesive Battery Front
Note: Visible inspection of the Embedded Battery.
There is risk to damage the cell laminate (Pinhole,
Bubbles or Wrinkles) when the Adhesive Battery Front
is removed.
Do not twist or deform the Embedded Battery in any way. A
Battery that has been dropped to floor should not be reused.
1288-9438
Rev 2
© Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
87(97)