Reassembly
Check that the Main Camera will be mounted into its
cavity and that the Flash LED FPC is in its normal
bending status before assembly!
Mount the Lower Rear Cover Assy and press it to snap the
hooks as shown.
Reassemble the Lower Rear Cover Assy in case of
malfunction of the Volume Key and Camera Key before
next actions!
Apply 12 Ncm torque when tightening the seven Screws
Torx Len:3.1 Diam:1.4 with Bits (JCIS No 0).
Take new screws!
5.6
Core Unit Label
Check that the label format is properly loaded in the Zebra
printer and write a new Label using the 'Label Make'
software.
Only one label is allowed!
1251-8382 Rev 2
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
81(85)