Replacement
4.34 Shielding Can Lid ABB
Follow the 3.1 – 3.5 Disassembly instructions.
Prepare the new Shielding Can Lid ABB.
Follow the 5.3 – 5.7 Reassembly instructions.
REMOVAL
Unsnap the corners of the Shielding Can Lid ABB using a
pair of tweezers and pull upwards to remove it.
Scrap the Shielding Can Lid ABB! It cannot be reused!
INSTALLATION
Place a new Shielding Can Lid ABB in the proper direction
as shown.
Press to snap it.
1251-8382 Rev 2
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
66(85)