Enlarging The Picture; Adjusting The Volume; Displaying Two Screens - Panasonic PT-LC56U Operating Instructions Manual

Enlarging the picture (D.ZOOM)
Press a D.ZOOM +/- button.
POWER
INPUT
VIDEO RGB
AUTO
MENU
SETUP
ENTER
FREEZE SHUTTER
B The picture will then
STD
be enlarged to 1.5
VOLUME D.ZOOM
times the normal size.
INDEX
WINDOW
PROJECTOR
The remote control unit functions during D.ZOOM (digital zoom)
Use the F,G,IandHbuttons to move the enlarged area which you want to project.
Use the D.ZOOM +/- buttons to change the enlargement ratio.
Press the MENU button to return to the normal screen.
NOTE:
B The enlargement ratio can be changed within the range of x1 to x2, in steps of
0.1. When RGB signals are being input, the enlargement ratio can be changed
within the range of x1 to x3, except when the FRAME LOCK is set to "ON".
B If the type of signal being input changes while the digital zoom function
is being used, the digital zoom function will be cancelled.
Adjusting the volume (VOLUME)
Press the VOLUME +/- button.
B Press the + button to raise the volume.
STD
B Press the - button to lower the volume.
VOLUME D.ZOOM
INDEX
WINDOW
NOTE:
B You can also select "VOLUME" from the
MAIN MENU to adjust the volume.
PROJECTOR
28-E
NGLISH
Displaying two screens (INDEX WINDOW)
This function lets you store a picture which is being projected into memory,
so that you can display a still picture and a moving picture on the screen.
[
The remote control unit functions during INDEX WINDOW
NOTE:
B When the screen size is changed, the picture's aspect ratio will also
B "INDEX WINDOW" on the MAIN MENU is the same function.
Press the INDEX WINDOW button.
AUTO
MENU
SETUP
B The aspect ratio of
the screen changes
ENTER
and the image is
vertically elongated
FREEZE SHUTTER
in comparison to a
normal image.
STD
VOLUME D.ZOOM
INDEX
WINDOW
PROJECTOR
Use the F and G buttons to select a screen size.
It can switch to three stages.
Still
Still Moving
picture picture picture
Use the I I and H H buttons to switch between the still picture screen
and moving picture screen.
Still Moving
picture picture
Press the ENTER button to capture the present moving picture in a
still window.
Press the MENU button to return to the previous screen.
change.Make sure that you fully understand the notes on ASPECT
which are given on page 40 before using the index window function.
Still Moving
picture picture
Still Moving
Moving
picture
picture picture
Moving Still
picture picture
E -29
NGLISH