Correcting Keystone Distortion And Automatic Positioning; Turning Off The Picture And Sound; Momentarily; Pausing A Picture - Panasonic PT-LC56U Operating Instructions Manual

Correcting keystone distortion and
automatic positioning (AUTO SET UP)
This projector detects its degree of tilt and the input signal. Keystone distortion and the
position of the image can then be corrected automatically in accordance with the input signal.
Press the AUTO SETUP button.
POWER
INPUT
(When the projected image has caused keystone distortion)
VIDEO RGB
AUTO
MENU
SETUP
ENTER
FREEZE SHUTTER
STD
B Automatic positioning
VOLUME D.ZOOM
will be carried out.
INDEX
WINDOW
PROJECTOR
Projector control panel
If you press the AUTO SETUP button, the items given in the table below will
be set automatically in addition to keystone distortion being corrected. The
setting details change according to the signal which is being input.
Input signal Contents set up automatically
POSITION, DOT CLOCK, CLOCK PHASE
(If the dot clock frequency is 100 MHz or higher, the DOT
RGB signals
CLOCK and CLOCK PHASE will not be set automatically.)
AUTO RGB IN
YP P signals AUTO RGB IN
B R
NOTE:
B If the edges of the projected picture are indistinct, or if a dark picture is being
projected, the automatic setup processing may stop automatically before it is
complete. If this happens, project a different picture and then press the AUTO
SETUP button once more, or make the above adjustments manually.
B If you would like to make further adjustments to the picture, use the menu
commands which are listed on page 30 and subsequent pages.
B Set "AUTO KEYSTN" in the OPTION1 menu to "OFF" to prevent any deterioration
of the picture as a result of keystone correction. (Refer to page 42.)
26-E
NGLISH
Screen
Projected
image
[

Turning off the picture and sound

momentarily (SHUTTER)
The shutter function can be used to momentarily turn off the picture and
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in shutter mode than it does in
normal projection mode.
POWER
VIDEO
AUTO
SETUP
ENTER
FREEZE
STD
VOLUME
INDEX
WINDOW
PROJECTOR
Pausing a picture (FREEZE)
Page
POWER
VIDEO
38
AUTO
SETUP
42
ENTER
42
FREEZE
STD
VOLUME
INDEX
WINDOW
PROJECTOR
Press the SHUTTER button.
INPUT
B The picture and sound will be turned off.
RGB
B Press any button on either the projector or
remote control unit to return to normal operating
MENU
mode.
NOTE:
SHUTTER B "SHUTTER" on the MAIN MENU is the same
function.
D.ZOOM
Press the FREEZE button.
INPUT
RGB
MENU
SHUTTER
B The picture being projected will be paused.
B Press the FREEZE button again to cancel the
D.ZOOM
still picture.
Still picture
E -27
NGLISH