Switching The Projector On/Off; Mains Lead - Panasonic PT-AE300E Operating Instructions Manual

Switching the projector on/off

Mains lead

Connecting
1. Make sure the shape of the mains plug and the
AC IN terminal on the back of the projector match,
then push the plug all the way in.
2. Align the side of the power cord secure lock with
the side guide rail of the AC IN terminal of the
projector and slide it in.
3. Place the latch to the latch catcher and press until
it clicks.
Latch
4. Connect the mains lead to a mains socket.
NOTE:
• Do not use other than the provided mains lead.
• Ensure all the input devices are connected and turned off before connecting the mains lead.
• Do not force the connector as this may damage the projector and/or the mains lead.
• Dirt or dust build-up around plugs may cause fire or electrical hazards.
• Switch off the power to the projector when not in use.
1. Unplug the mains lead from the mains socket.
2. Depress the latch and slide the cover off.
3. Slide the power cord secure lock up along the side
Rail guide
4. Hold the plug and unplug the mains lead from the
Disconnecting
Latch
guide rail and remove.
AC IN terminal on the back of the projector.
Rail guide
E
NGLISH - 19