Panasonic PT-AE300E Operating Instructions Manual page 17

Projector location range
You can determine where to locate the screen and the projector by considering the lens shift possibilities.
When the screen position is fixed
When the projector position is fixed
NOTE:
• When the projector is located right in front of the centre of the screen and the lens shift dials is centred, you will get the
best quality of the projection image.
• When the Lens shift dial • Vertical is at the vertical limit of the shift range, you cannot turn the dial to the horizontal limit,
likewise when the Lens shift dial • Horizontal is at the horizontal limit of the shift range, you cannot turn the dial to the
vertical limit.
• When the projector is tilted and adjusting KEYSTONE, the centre of the screen and the lens need to be realigned.
• Do not force the lens shift dials to turn as this may damage the projector. Turning the dials maximum limit is 4 or 5 times
from the default position.
• When the lens is shifted vertically more than 50 %, LENS MEMORY SAVE will not save the lens position correctly. See
"LENS CONTROL" on page 40.
Projector
V
Vertical centre of
screen
SH
Screen
SW
100%
SH
100%
40%
H
Placement
Centre of lens
Shift range
40%
SW
Projector
Setting up
E
NGLISH - 17