Panasonic VB-44210G User Manual page 67

Section 700 - Operation
To delete a DID/DNIS Answer Code:
1. Pick up the receiver or press the ON/OFF key.
2. Press PROG.
3. Dial #95.
4. Press HOLD.
5. Press the ON/OFF key.
Related Programming
• FF1 (System): Number of DID/DNIS Digits to Voice Mail
• FF1 (System): DID/DNIS Flexible Ringing Assignments
Considerations
DID/DNIS digit transmission. The DID/DNIS digits are only sent to ports
that are assigned as voice mail.
Answer code entry. The DID/DNIS Answer Code can be entered from an
attendant phone or a key phone that has entered the programming access
code.
VM ports and hunt groups. The DID/DNIS digits can be sent to a specific
voice mail port or a voice mail hunt group.
Second hunt group. If the DID/DNIS call rings into a hunt group that in turn
transfers the call to a second hunt group, the DID/DNIS calls are not
transmitted to the second hunt group.
Third-party VM. This feature can be used third-party voice mail systems. If
the feature is used with third-party voice mail systems, the voice mail can be
connected through analog extension ports or OPX ports.
Call forward ID. When DID/DNIS calls are forwarded to voice mail, the Call
Forward ID Code is transmitted to the voice mail. The DID/DNIS digits are
not.
DID/DNIS data transmission. The DID/DNIS digits are transmitted over the
API link using the existing API key code packet.
DBS-2.3/9.2-700
The ON/OFF LED goes off.
DBS Manual - Revised April 2000
Chapter 3. System Features
Page 3-21