Answer Supervision For Voice Mail - Panasonic VB-44210G User Manual

Chapter 3. System Features
• The maximum number of verified account codes is 100.
• Each verified account code must consist of 4 digits.
• "0000" cannot be used for a verified account code.
• Verified account codes do not override station lockout.
• Verified account codes do not override Least Cost Routing (LCR) settings.
• With CPC-AII and CPC-B Version 3.1 to 5.04, non-verified account codes

Answer Supervision for Voice Mail

(CPC-AII and CPC-B Version 5.0 or higher)
Description
This feature allows the DBS to send an answer signal to third-party voice
mail systems.
In previous releases, a third-party voice mail did not receive a signal to
indicate that a DBS extension had answered. To determine that the extension
had answered, the voice mail system had to wait until it stopped receiving
ringback tone. Waiting for the ringback to stop often delayed connection
times for calls from voice mail to extensions. Sending an answer signal
provides quicker response time between the DBS and the voice mail system.
Operation
The following programming can be performed from an attendant phone or
any other phone that has entered the programming access code.
To assign an answer signal code:
1. Press the ON/OFF key.
2. Press the PROG key.
3. Dial "#94."
Page 3-6
can be used. However, they can only be used on a voluntary basis. Forced
non-verified account codes are not available with CPC-B 3.1 to 5.04.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700