Basic
Taking a Still picture
•
Set the drive mode to [
1
Select the Recording Mode. (P26)
2
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
•
Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not
achieved, except when set to flash.)
•
When the image is correctly focused, the
picture will be taken, since the [Focus/
Release Priority] is set initially to [FOCUS].
3
Press the shutter button fully (push it in
further), and take the picture.
24
VQT5A95 (ENG)
] (single) by pressing 4(
).
1.7
1.7
1.7
60
60 60
A
B