Buttons, Connectors And Indicators - JVC HR-S5961E Instructions Manual

Hide thumbs Also See for HR-S5961E:
Table of Contents

Advertisement

Buttons, Connectors and Indicators

Front Panel
Cassette loading slot
PR+/–
Display panel
S-VHS indicator
REVIEW indicator
Play indicator
Record
indicator
Counter/Remain display**
* Each time you press – –:– –, the display panel shows the channel
number and the clock time alternatively.
** The counter can display up to +/– "19:59:59". If the playback or
recording time exceeds this limit the display starts to count from
"0:00:00".
Rear Panel
Mains power cord
Pause 9 [SAT#]
Record7
Stop/Eject
0
Rewind
Play 4
3
Infrared beam
Fast
Forward
receiving window
5
Timer mode indicator
VCR indicator
SAT# indicator
Channel and
auxiliary input/
Clock time*
Remote control
* PDC recording is not possible in Central and Eastern Europe.
On-screen display
If you press
(OK ) on the remote control when "O.S.D." is set to
"ON" (
12), you can see the current recorder status on the
screen. To clear the on-screen display, press
The indications are not recorded even if the recorder is in the
recording mode.
A Recorder operation mode
B Tape speed
C Tape direction
D Time counter
E Tape remaining time
F Audio mode
G Tape position*
* The position of "
the current position on the tape.
H VPS/PDC* indicator
* PDC recording is not possible in Central and Eastern Europe.
I Type of broadcast
J Current day/month/year
K Clock
L Channel and auxiliary input
M Cassette loaded mark
N S-VHS ET indicator
— 3 —
number keys
S-VHS ET : OFF
q
" in relation to "0" (Beginning) or "+" (End) shows
(OK ) again.

Advertisement

Table of Contents
loading

Table of Contents